1972 Chevelle Warranty Card Protect-O-Plate

 

1964

1965

1966

1967

1968

1969

1970

1971

1972

 

Decode your Protect-O-Plate Warranty card.

 

 

The Protect-O-Plate (P-O-P) was designed to be used by Chevrolet dealers to identify the owner and the vehicle.  The owner's name, address and the vehicle's delivery date was embossed on a special tape affixed to the plate.

 

The P-O-P was glued to the inside rear cover of the "1972 Chevrolet New Vehicle Warranty and Owner Protection Plan" booklet. When warranty service was performed on a customer's car the P-O-P was stamped on the work order.

 

The P-O-P was never meant to be used as documentation the way enthusiasts today use the card. Then again, the body broadcast sheets, trim build sheets, etc. weren't meant to be used either and were more often than not  discarded at the assembly plant. Likewise, the P-O-P was usually discarded when the vehicle went out of warranty or when the car was sold as warranties usually did not go to the new owner.

 

Today, the P-O-P is one of the best pieces of documentation you can have as it not only identifies the VIN but also the correct engine ID code and date of the engine, the correct transmission number and date along with the rear end gear ratio and date. Some options were also coded on the P-O-P such as power steering, power brakes, radio, air conditioning, etc.

 

The Protect-O-Plate is located inside the inside rear cover of the warranty booklet. The original stamping is a mirrored stamping, this example is from the Baltimore, MD.  assembly plant.

 

Beware of reproduction (fake) Protect-O-Plates, they can make a put-together Chevelle appear to be authentic. Sellers will even put your name on authentic-looking GM tape. Apparently it's not illegal but any fake documentation is misleading to a potential buyer and, to many Chevelle owners, unethical as well.

 

This is the above Baltimore, MD. P-O-P mirrored for easy reading.

 

 

Line 1
* The complete VIN for the car.

 

Line 2:
* Engine identification showing the engine plant code ("T" in this example for the Tonawanda engine plant), a 4-digit number for the day and month of the engine assembly, and a three-letter suffix code identifying the engine size/hp and transmission type. in this example the engine was assembled at the Tonawanda engine plant on January 5(1972) and it's a 350cid 175hp engine with automatic transmission. ⁽¹⁾

* The B2C05 decodes to a Cleveland-built TH350 automatic transmission for the 1972 model year assembled on February 5 (1972). ⁽²⁾

 

Line 3:
* The rear end ratio, date, and rear end assembly plant. in this example "KDC" is a 2.73:1 gear ratio built at the McKinnon Industries (GM of Canada), 074- a Julian date counted from the current model year, 074 is the 74th day of 1972 or is the assembly date of March 14, 1972.
* The "R" is for the carburetor type and in this example it is an "R" for a Rochester carburetor.
* The number "1" in the first position indicates the car was optioned with RPO N40 power steering and the number "3" in the third position indicates the car was optioned with either RPO U63, U69, or U79 radio equipment.
* The bowtie emblem indicates this is a Chevrolet plate.
* The letter "C" is the production month of the car, March of 1972.

 

⁽¹⁾ Some plants would stamp the 3-letter suffix code after the plant/date, some stamped it 3-letter suffix code before the plant/date.
⁽²⁾ Both the Powerglide and TH350 automatic transmissions were built at Cleveland and Toledo in the U.S.

 

 

---

 Say you saw it here on © ChevelleWorld

Want more in-depth information on 1964-1972 Chevelles? My Facts and SS Guide program CD, my Shop Manuals & Parts Catalog program DVD, and my 1964-1972 Trim Tag and Warranty Card program CD. Check them and other informative program CDs at my https://chevellecd.net website.